Solving "Operation Timeout" Errors When Getting Compute List in GNS3

Have you been trying to get your Compute List in GNS3 but fail due to Operation Timeout Error? Do not worry, as we have got your back. Here’s everything you need to know to quickly get rid what is causing this error and get your compute list.

What is GNS3?

GNS3, or Graphical Network Simulator-3, is an enhanced emulation and virtualization software for network engineers and system administrators to create and test network topologies, automate network device configuration, and create real-world labs.

What is an Operation Timeout Error?

An Operation Timeout Error is a networking term where a system, while communicating with another system, times out while waiting for a response. This can happen if either one of the systems can’t reach its destination or the response time is too slow.

What Causes the Operation Timeout Error?

GNS3 operation timeouts may occur for various reasons. Common causes of this error include:

  • Incorrect firewall settings
  • Outdated network adapter drivers
  • Not enough free RAM

How to Fix Operation Timeout Error When Getting Compute List in GNS3

Here’s what you can do to troubleshoot an Operation Timeout Error in GNS3.

1. Connect from a different network

If you are getting Operation Timeout Error due to a slow response, you can try connecting from a different network to see if you can get a better response.

2. Reinstall network adapters

If you have outdated network adapter drivers, you can uninstall and reinstall them to fix this error. You can uninstall them using the following command:

sudo apt-get remove <network_adapter_name>

Then, reinstall them using the following command:

sudo apt-get install <network_adapter_name>

3. Update your firewall

If your firewall settings are not allowing the GNS3 connection, you can update your firewall settings to fix this error.

4. Increase your RAM

If your system has limited RAM, you can increase your RAM to fix this error.


What are the causes of Operation Timeout Error in GNS3?

The most common causes of this error in GNS3 include incorrect firewall settings, outdated network adapter drivers, and insufficient RAM.

How do I update my firewall settings?

Depending on the type of firewall you’re using, you may need to update the settings. Check the documentation provided by your firewall vendor for more information.

How do I increase my RAM?

You can increase your RAM by installing additional RAM chips in your system. Consult the system manufacturer's guide for more information.

What is the command to uninstall network adapters?

The command to uninstall network adapters is sudo apt-get remove <network_adapter_name>.

What is the command to reinstall network adapters?

The command to reinstall network adapters is sudo apt-get install <network_adapter_name>.

Great! You’ve successfully signed up.

Welcome back! You've successfully signed in.

You've successfully subscribed to

Success! Check your email for magic link to sign-in.

Success! Your billing info has been updated.

Your billing was not updated.